How XRPUSDT order size rules actually work on Bitunix
2 XRP minimum, 0.1 XRP steps, 2,000,000 XRP per market order
Key takeaway
The most common sizing mistake after a day like this is treating the order ticket as if it accepts any number you type. XRPUSDT on Bitunix was down 9.35% from its 24h open at 4:17 PM ET Saturday (1.0113 to 0.9167), and when traders rush to resize, the ticket's own rules decide what actually gets placed.

The minimum line
Bitunix's public trading-pair data for XRPUSDT sets the minimum opening amount at 2 XRP. At the 4:17 PM ET mark of 0.9174 that is about 1.83 USDT of notional. Anything smaller is not an order the ticket can open.
The step line
Quantity precision is 1 decimal, so size moves in 0.1 XRP steps. Price precision is 4 decimals, so the price field moves in 0.0001 steps. A quantity with a second decimal gets trimmed; a price with a fifth decimal gets trimmed. Neither is a big deal on one order, but traders who scale in with many small orders notice the drift.
The cap line
There are two separate per-order caps, and the gap between them is large:
- Market order: up to 2,000,000 XRP per order. At 0.9174 that is about 1,834,800 USDT.
- Limit order: up to 10,000,000 XRP per order. At 0.9174 that is about 9,174,000 USDT.
So a limit order can carry five times what a market order can. If you need size fast, the cap is the reason a single market click may not be enough.
The price line
The same data lists a price protection scope of 0.02. Bitunix's API documentation spells out what that means: the lowest sell order price is mark x (1 - 0.02) and the highest buy order price is mark x (1 + 0.02). At 0.9174 that puts the sell floor at about 0.8991 and the buy ceiling at about 0.9357. A sell priced below the floor or a buy priced above the ceiling falls outside the protected range.
Worked steps
- Start from your target notional N in USDT.
- Convert to coin: XRP_qty = N / mark, which right now is N / 0.9174.
- Round XRP_qty down to one decimal.
- If XRP_qty is under 2, the order cannot open. Raise N or skip the trade.
- If you are using a market order and XRP_qty is above 2,000,000, split it into blocks of 2,000,000 or fewer. For a limit order the block size is 10,000,000.
- For a limit order, check the price against the band: buys at or below mark x 1.02, sells at or above mark x 0.98. Recompute with the live mark, not with the number from an hour ago.
- Look at funding before you hold. XRPUSDT funding was +0.006768% per 8h at the same fetch, so longs were paying shorts: carry per settlement is N x 0.006768%.
Common mistakes
- Sizing in USDT and forgetting the 0.1 XRP step, then wondering why the filled size is a hair smaller than planned.
- Assuming a limit order and a market order share one cap. They do not; the limit cap is five times larger.
- Setting a sell limit far below the market to get out fast. Below mark x 0.98 the price is outside the protected range.
- Copying XRP's numbers to other pairs. BTC, ETH, SOL and DOGE each have their own minimum, steps and caps.
- Treating the per-order cap as a position limit. It limits one order, not what you can hold.
FAQ
Why did my order size change slightly after I submitted it? Most often it was trimmed to one decimal of XRP, the quantity step.
Does the price band move? Yes. It is calculated from the mark price, so on a fast day like this one the floor and ceiling shift with every tick of the mark.
Is the 2 XRP minimum the same for closing? The published figure is the minimum opening amount; check the ticket when closing a small remainder.
Next time you size an XRPUSDT trade, run the four lines in order (minimum, step, cap, price band) before you press the button, and the ticket will not surprise you.
FAQ
What is the minimum and step size for XRPUSDT on Bitunix?
The minimum opening amount is 2 XRP. Quantity precision is 1 decimal, so size moves in 0.1 XRP steps, and price precision is 4 decimals, or 0.0001. At 0.9174 at 4:17 PM ET on Nov 14, 2026, 2 XRP was about 1.83 USDT of notional. A quantity with a second decimal or a price with a fifth decimal gets trimmed.
Do Bitunix market and limit orders share the same XRPUSDT cap?
No. A market order can carry up to 2,000,000 XRP (about 1,834,800 USDT at 0.9174), while a limit order can carry up to 10,000,000 XRP (about 9,174,000 USDT). The limit cap is five times larger. The per-order cap limits one order, not the position you can hold.
How does Bitunix's 2% price protection work on XRPUSDT?
The pair data lists a price protection scope of 0.02. The lowest sell order price is mark times 0.98 and the highest buy order price is mark times 1.02. At 0.9174 that is a sell floor of about 0.8991 and a buy ceiling of about 0.9357. The band is calculated from the mark price, so it moves as the mark moves.
Why did my Bitunix XRPUSDT order size change after I submitted it?
Most often it was trimmed to one decimal of XRP, the quantity step. The published 2 XRP figure is the minimum opening amount; check the ticket when closing a small remainder. These numbers are for XRPUSDT only; BTC, ETH, SOL and DOGE each have their own minimum, steps and caps.