Home / Blog / MEXC

You added to your SOL_USDT long on MEXC and your stop stayed put

what Entire vs Partial TP/SL do when the position changes

By Updated

Key takeaway

"I added to my position and my stop-loss didn't move." That is not a bug on MEXC. It is how the TP/SL is built, and MEXC's TP/SL guide (dated Nov 13) says it in one line: "If you add to the position later, the average entry price changes but the trigger price stays where you set it."

MEXC logo, for the post: You added to your SOL_USDT long on MEXC and your stop stayed put: what Entire vs Partial TP/SL do when the position changes
MEXC logo.
  1. The rule

A MEXC TP/SL is a trigger at a fixed price. When the Last, Fair or Index price you picked reaches it, MEXC places a market order to close the set quantity. The trigger does not follow your average entry.

  1. The formula

avg_entry_new = (q1 x p1 + q2 x p2) / (q1 + q2) stop_distance_new = avg_entry_new - stop_trigger (for a long) loss_at_stop = (q1 + q2) x contract_size x stop_distance_new + fees

Add at a lower price and avg_entry_new drops toward your stop, so the distance shrinks while the size grows. Add higher and the distance widens. Either way, an ROE or PNL target you typed was converted to a trigger price when you set it. MEXC says the ROE and PNL figures shown are estimates, and that fees, changes in your average entry price and the final fill price can all change the actual result.

  1. Entire vs Partial
  • Entire Position (web) / Position TP/SL (app): covers the whole position even if it grows or shrinks later, and cancels itself once the position is closed.
  • Partial Position (web) / TP/SL in Batches (app): closes only the quantity you entered. MEXC notes a partial TP/SL may not trigger if the closable quantity is no longer enough.
  • Reverse (Entire only): after a TP or SL closes the whole position, the system opens a market order of the same size the other way. MEXC says the reverse may not fill in full and opens a new position with its own risk.
  1. SOL_USDT this afternoon

MEXC's public SOL_USDT ticker at 4:01 PM ET on Nov 13: last 79.83, fair 79.88, index 79.89, 24h high 82.37 and low 77.87, a 5.78% range. Funding read 0.0086% for the 8h period. MEXC's contract data lists 0.1 SOL per contract with a 0% maker / 0.02% taker default fee. MEXC fees vary by region: its Oct 26 notice set BTCUSDT at 0.01% / 0.04% for selected countries and regions, so check your own fee page. A triggered TP/SL is a market order, so it pays the taker side.

Which closing tools can act as a stop? MEXC's guide is specific: a plain limit order or Post Only cannot, because it only fills at the last price or better. A market order, a trigger order or a trailing stop order can, because they are allowed to fill at a worse price.

  1. Steps after you add
  1. Re-read your average entry on the position line.
  2. Recompute the stop distance with the formula above.
  3. If the stop no longer fits the plan, move it. Nothing moves it for you.
  4. If you used Partial orders, check that the closable quantity still covers each one.
  5. Check that Reverse is off unless you actually want a new position.
  1. Mistakes
  • Assuming an ROE-based stop keeps tracking ROE after you add. It became a price.
  • Stacking Partial orders larger than what is still closable.
  • Leaving Reverse on through a news move.
  • Forgetting the regional fee line on ETH_USDT or BTC_USDT.
  1. FAQ

Does my TP/SL stay active if I add? Yes, at the same trigger price.

Does Entire Position cover the added size? Yes. It covers the whole position as it grows or shrinks.

Which price should trigger it? MEXC offers Last, Fair and Index. Fair is the price MEXC uses for unrealized PnL and liquidation.

Are XRP_USDT or DOGE_USDT different? Same mechanics; contract sizes and fees differ by pair and region.

Next time you size a trade and then add to it, recompute the stop distance before the next candle, not after the stop fires.

Open an account