Home / Blog / BloFin

Myth: a limit order always pays the maker fee.

Rule on BloFin: only if it rests on the book first (BTC-USDT, beginner)

By Updated

Key takeaway

Ever placed a limit buy on BloFin, checked the fill, and wondered why the fee line shows the taker rate? The myth. "Limit order" and "maker" are not the same thing. Plenty of new traders pick Limit on the order panel, type a price, and assume they locked in the cheap fee.

BloFin logo, for the post: Myth: a limit order always pays the maker fee. Rule on BloFin: only if it rests on the book first (BTC-USDT, beginner)
BloFin logo.

The rule. BloFin's fee schedule defines a maker order as a limit order that goes into the order book before being filled. If your limit price is already at or through the best price on the other side, the order fills on arrival, takes liquidity, and pays the taker rate. The order type you clicked does not decide the fee; what the order does when it hits the book does.

The numbers this afternoon. BloFin public feed at 3:52 PM ET on Nov 9, 2026, BTC-USDT perpetual:

  • best bid 74,858.1, best ask 74,858.4, so the spread was 0.3 USDT, about 0.0004% of price
  • last trade 74,847.7, mark 74,857.6, index 74,880.7
  • one contract = 0.001 BTC, minimum size 0.1 contracts
  • largest single market order 100,000 contracts, largest single limit order 1,000,000 contracts
  • Regular futures fees: 0.0200% maker, 0.0600% taker. VIP 1: 0.0060% maker, 0.0500% taker.

Worked steps (sizes stay as variables).

  1. Fee per fill = contracts x 0.001 x fill_price x rate.
  2. A limit buy at 74,858.4 or higher meets the 74,858.4 ask right away. That is a taker fill: per contract, 0.001 x 74,858.4 x 0.06% = about 0.044915 USDT.
  3. A limit buy at 74,858.1, the current bid, joins the queue. If someone later sells into it, it fills as maker: 0.001 x 74,858.1 x 0.02% = about 0.014972 USDT per contract. Same direction, roughly a third of the fee, but no guarantee it fills.
  4. Round trips on notional: maker in and maker out = 0.04%, one side each = 0.08%, taker both ways = 0.12%.
  5. Size limits matter too. A single market order tops out at 100,000 contracts (100 BTC of exposure); a limit order can be ten times that. Big orders that must fill now get split.

Why the panel still offers both. Market and marketable limit orders buy certainty of execution. Resting limit orders buy a lower fee and a set price, and pay for it with fill risk: price can run away and leave you with nothing. With a 0.3 USDT spread on BTC-USDT the price gap between joining the bid and lifting the ask is tiny, so the fee line is the main difference on a calm book. On a thin pair or in a fast move, the spread can matter more than the fee.

What changes it.

  • VIP level. The maker rate drops faster than the taker rate as tiers rise (0.0060% vs 0.0500% at VIP 1), so the gap between resting and crossing gets wider, not narrower.
  • Partial fills. Part of one order can fill as taker on arrival and the rest can rest and fill later as maker. Check each fill line, not the order line.
  • Stops and take profits. Trigger orders that send a market order fill as taker by design.
  • Mark vs last. Your fill happens at traded prices; your unrealized PnL and liquidation follow mark. They were 9.9 USDT apart at the time above.

Common mistakes.

  • Typing a limit price a few ticks through the ask "to make sure it fills" and expecting maker fees.
  • Comparing fees per order instead of per round trip. The exit counts too.
  • Forgetting that a resting order can sit unfilled through the whole move you wanted.
  • Leaving old limit orders on the book after the plan changed. If one fills later, it opens a position you no longer want.

Quick FAQ.

Does a limit order ever pay taker? Yes, when it matches on arrival. Does BloFin show which fills were maker? Each fill in your trade history carries its own fee, so you can check the rate. Is market always worse? It costs the taker rate plus crossing the spread, and it fills. That trade-off is the whole decision.

The formula to keep: fee = contracts x contract_value x fill_price x rate, and the rate depends on whether your order rested first, not on the button you clicked.

Recent public API snapshot

BloFin markets snapshot

Observed Nov 16, 2026, 6:05 AM ET: BloFin reported 528 listed perpetual futures (412 crypto, 110 stocks, 5 commodities and 1 index). BTC/USDT was 64,492.5 USDT (-1.48% in 24h) and ETH/USDT 1,806.9 USDT (-1.15%). The largest estimated turnover in the returned USDT tickers was BTC/USDT at approximately 247.8M USDT.

Recent snapshot · BloFin public API · perpetual / USDT · source 2026-11-16 11:05 UTC · retrieved 2026-11-16 11:05 UTC

Listed perpetuals
528

412 crypto · 110 stocks · 5 commodities · 1 index

BTC/USDT
64,492.5 USDT

-1.48% 24h · 247.8M USDT vol · funding +0.0014% / 8h

ETH/USDT
1,806.9 USDT

-1.15% 24h · 40.9M USDT vol · funding -0.0021% / 8h

Approx. USDT perps 24h turnover
528.1M USDT

Summed across 504 USDT-margined perps

Updated · Data: BloFin

Top USDT perps by 24h volume

#PerpLast24h24h volume
1BTC/USDT64,492.5-1.48%247.8M USDT
2ZEC/USDT893.5-2.82%63.9M USDT
3ETH/USDT1,806.9-1.15%40.9M USDT
4XRP/USDT0.9562-0.76%23.0M USDT
5SOL/USDT71.68-0.54%15.4M USDT

Updated · Data: BloFin

Funding-rate extremes

Highest

PerpRateEvery
EVAA+0.1073%4h
NVDAStock+0.0387%8h
SNDKStock+0.0156%8h

Lowest

PerpRateEvery
TRX-0.0448%8h
1000BONK-0.0151%4h
INJ-0.0115%8h

Rate per funding interval: positive means longs pay shorts, negative means shorts pay longs. Only USDT perps with at least 1.0M USDT of 24h volume are ranked.

Updated · Data: BloFin

Observation time is not an exchange timestamp. Snapshots older than 10 minutes are labeled stale, and data over 12 hours old is withheld. Turnover is approximate: base volume times last price, not reported quote turnover. USDT is not a converted USD value. Not financial advice. All BloFin market data →

Open an account