Home / Blog / BloFin

BloFin ETH-USDT order limits, in one formula

0.01 ETH per contract, 0.1 contract steps, 200,000 contracts per market order

By Updated

Key takeaway

An order limit is the size range the ticket will accept for one submission: a floor, a step and a ceiling.

BloFin logo, for the post: BloFin ETH-USDT order limits, in one formula: 0.01 ETH per contract, 0.1 contract steps, 200,000 contracts per market order
BloFin logo.

On BloFin's ETH-USDT perpetual all three are counted in contracts, not in ETH and not in USDT, and on a day when ETH is down 8.81% from its 24h open (1,936.22 to 1,765.63 at 4:17 PM ET Saturday) people resize in a hurry and trip over exactly that.

Rule

BloFin's public instrument data for ETH-USDT lists a contract value of 0.01 ETH, a minimum size of 0.1 contract, a lot size (the step) of 0.1 contract, a tick size of 0.01, a maximum market order of 200,000 contracts and a maximum limit order of 600,000 contracts. Those are per-order numbers. They say nothing about how big a position can get over several orders; risk limits handle that separately.

Formula

contracts = ETH_qty / 0.01, rounded down to a multiple of 0.1

notional_USDT = contracts x 0.01 x mark

max_ETH_per_market_order = 200,000 x 0.01 = 2,000 ETH

max_ETH_per_limit_order = 600,000 x 0.01 = 6,000 ETH

min_ETH_per_order = 0.1 x 0.01 = 0.001 ETH

Steps

  1. Decide your size in ETH or in USDT. Call it ETH_qty, or N if you think in USDT.
  2. If you started from N, convert: ETH_qty = N / mark. At the 4:17 PM ET mark of 1,765.54 that is N / 1,765.54.
  3. Convert to contracts: contracts = ETH_qty / 0.01. Drop anything past the first decimal, because the step is 0.1 contract. Whatever you drop is size you will not get.
  4. Check the floor. Below 0.1 contract (0.001 ETH, about 1.77 USDT at that mark) the ticket has nothing to place.
  5. Check the ceiling for the order type you picked. A market order tops out at 200,000 contracts, which is 2,000 ETH, roughly 3,531,080 USDT at that mark. A limit order tops out at 600,000 contracts, 6,000 ETH, roughly 10,593,240 USDT.
  6. If your contracts number is above the ceiling, split it: full blocks of the cap plus one remainder order. Each block pays its own fee and each market block takes whatever the book offers at that moment.

What changes it

The contract value, step and caps are instrument settings and BloFin can revise them, so read the instrument data before a large order rather than trusting a number from last month. The mark moves every second, so the USDT figures above are a snapshot; the contract math does not move. Leverage changes the margin you post, not the contract count: the same contracts at a higher L use less margin and sit closer to liquidation. Funding was -0.0026% per 8h on ETH-USDT at the same fetch, meaning shorts were paying longs; that touches holding cost, not the ticket.

Mistakes

  • Typing an ETH amount into a field set to contracts. On this pair that is a hundredfold error in either direction, because each contract is 0.01 ETH.
  • Assuming the step is 1 contract. It is 0.1, so any second decimal in your contract count is simply cut off.
  • Firing one giant market order and being surprised by the rejection. The 200,000-contract cap is a hard stop for a single market order.
  • Thinking the limit cap and the market cap are the same. Limit allows three times more per order on this pair.
  • Copying the ETH contract value onto other pairs. BTC, SOL, XRP and DOGE each carry their own contract value, step and caps.

FAQ

Why does the ticket show a slightly different quantity than I typed? Most likely rounding to the 0.1-contract step, or a unit switch between contracts and coin in the amount field.

Is 200,000 contracts the most ETH I can hold? No. It is the most a single market order can carry. Position size is governed by risk limits and margin, not by this cap.

Does the cap change with leverage? No. Leverage changes margin per contract. The per-order contract cap stays the same.

Checklist

  • Size in ETH, convert with / 0.01, round down to 0.1.
  • Floor 0.1 contract, ceiling 200,000 (market) or 600,000 (limit).
  • Above the ceiling: split into blocks.
  • Recheck the instrument data before any order near the caps.

Stale snapshot - not current

BloFin markets snapshot

Observed Nov 16, 2026, 5:45 AM ET: BloFin reported 528 listed perpetual futures (412 crypto, 110 stocks, 5 commodities and 1 index). BTC/USDT was 64,511.3 USDT (-1.52% in 24h) and ETH/USDT 1,805.3 USDT (-1.28%). The largest estimated turnover in the returned USDT tickers was BTC/USDT at approximately 238.9M USDT.

Stale snapshot · BloFin public API · perpetual / USDT · source 2026-11-16 10:45 UTC · retrieved 2026-11-16 10:45 UTC

Listed perpetuals
528

412 crypto · 110 stocks · 5 commodities · 1 index

BTC/USDT
64,511.3 USDT

-1.52% 24h · 238.9M USDT vol · funding +0.0004% / 8h

ETH/USDT
1,805.3 USDT

-1.28% 24h · 40.4M USDT vol · funding -0.0024% / 8h

Approx. USDT perps 24h turnover
516.6M USDT

Summed across 504 USDT-margined perps

Updated · Data: BloFin

Top USDT perps by 24h volume

#PerpLast24h24h volume
1BTC/USDT64,511.3-1.52%238.9M USDT
2ZEC/USDT890.28-2.72%63.8M USDT
3ETH/USDT1,805.3-1.28%40.4M USDT
4XRP/USDT0.951-1.30%22.9M USDT
5SOL/USDT71.42-0.74%15.6M USDT

Updated · Data: BloFin

Funding-rate extremes

Highest

PerpRateEvery
EVAA+0.0655%4h
NVDAStock+0.0329%8h
ASTER+0.0155%4h

Lowest

PerpRateEvery
TRX-0.0461%8h
1000BONK-0.0127%4h
LIT-0.0119%4h

Rate per funding interval: positive means longs pay shorts, negative means shorts pay longs. Only USDT perps with at least 1.0M USDT of 24h volume are ranked.

Updated · Data: BloFin

Observation time is not an exchange timestamp. Snapshots older than 10 minutes are labeled stale, and data over 12 hours old is withheld. Turnover is approximate: base volume times last price, not reported quote turnover. USDT is not a converted USD value. Not financial advice. All BloFin market data →

Open an account