Home / Learn / USDT-M vs USDC-M vs COIN-M

USDT-M vs USDC-M vs COIN-M Perpetual Futures

By Updated

Short answer

USDT-M and USDC-M perpetuals are linear: you post a stablecoin as margin and profit and loss settle in that stablecoin, so dollar risk is easy to read. COIN-M perpetuals are inverse: margin and PnL are in the coin, so your collateral moves with the price. For most beginners a USDT-M contract is the simplest place to start.

Checked

A futures tab often shows three books: USDT-M, USDC-M and COIN-M. They can trade the same coin on the same chart and still leave you with a different balance after the same move. The difference is the asset you post as margin and the asset your profit and loss is paid in. This page explains the three, then lists which margin types BloFin, Bitunix, Bitbase, MEXC and BYDFi offer, checked on November 10, 2026 (ET).

What is the difference between USDT-M, USDC-M and COIN-M?

USDT-MUSDC-MCOIN-M
Margin you postUSDTUSDCThe coin (for example BTC)
PnL paid inUSDTUSDCThe coin
Contract familyLinearLinearInverse
Typical symbolBTCUSDTBTCUSDCBTCUSD
Collateral moves with price?No (stablecoin)No (stablecoin)Yes

Bitunix's guides put it the same way: USDC-M futures "use USDC as the margin and settlement currency," while Coin-M futures "use crypto as margin and settlement," so "a BTC-margined position uses BTC as collateral, with realized PnL settled in BTC." BYDFi's help center describes USDT-M contracts as "quoted and settled in USDT" and COIN-M contracts as "settled in the underlying cryptocurrency."

Which is linear and which is inverse?

Linear contracts (USDT-M and USDC-M) are sized in the coin and paid in the stablecoin, so PnL is roughly quantity times price change. Inverse contracts (COIN-M) are usually sized in US dollars per contract and paid in the coin, so PnL uses the reciprocal of price. MEXC's futures calculation guide gives the coin-margined long formula as (1 / average entry price − 1 / closing price) × position size × contract value. Bitunix notes the exact formula depends on each contract's face value, so use the calculation shown for the specific contract. For the mechanics in more depth, see linear and inverse contracts.

How does PnL work on each?

Illustration with round numbers, before fees and funding:

  • USDT-M long, 0.1 BTC: if BTC rises by $1,000, the position gains about 100 USDT. If it falls by $1,000, it loses about 100 USDT. Your margin stays in USDT the whole time.
  • COIN-M long, BTC margin: a rise pays you in BTC while each BTC is worth more, so the dollar gain is larger. A fall costs you BTC while each BTC is worth less, so in dollar terms the long loses twice: on the position and on the collateral.

That second point is the main beginner trap. On a COIN-M long, the dollar value of your margin shrinks as the price drops, at the same time the position is losing. Liquidation is still decided by the exchange's margin rules and mark price; see liquidation price and mark price vs last price.

Which margin types do BloFin, Bitunix and Bitbase offer?

Counts below come from each exchange's public market data on the morning of November 10, 2026 (ET). They change as contracts list and delist, so check the live futures page before trading.

ExchangeUSDT-M perpsUSDC-M perpsCOIN-M (inverse) perps
BloFin505 live10 live (for example BTC-USDC, ETH-USDC, SOL-USDC)14 live (for example BTC-USD, ETH-USD, SOL-USD, XRP-USD)
Bitunix753 open25 open15 open (for example BTCUSD, ETHUSD, XRPUSD, SOLUSD)
Bitbase512 tradable6 tradable (BTC, ETH, LTC, HBAR, PENGU, XRP)None in Bitbase's public contract list; every contract is stablecoin-margined
MEXC1,1005510 (for example BTC_USD, ETH_USD); MEXC also lists 35 USD1-margined contracts
BYDFiOfferedNot confirmed in the help centerOffered ("BYDFi provides COIN-M and USDT-M in perpetual contracts")

MEXC note: a FinCEN order against MEXC Global takes effect on December 10, 2026, and some exchanges are already holding deposits that come from MEXC. Read the MEXC FinCEN order and Binance's MEXC deposit holds before you move funds there.

Which should a beginner start with?

Start with a USDT-M perpetual on a major coin, at low leverage, in isolated margin:

  • The dollar math is direct. A stop that risks 50 USDT risks 50 USDT, whatever the coin does to your other holdings.
  • USDT-M has the widest choice. On BloFin, Bitunix, Bitbase and MEXC, USDT-M contracts far outnumber USDC-M and COIN-M ones.
  • One margin balance covers many coins. You can trade BTC, ETH and SOL contracts from the same USDT balance.
  • Funding and fees are in the same unit as your margin. On an inverse contract, the same printed funding rate is paid in coin, not USDT.

Isolated margin caps the loss on one position at the margin you assigned to it; see isolated margin and cross margin.

When does COIN-M make sense?

COIN-M fits traders who already hold the coin and want to keep their account in that coin. The common case is a hedge: Bitunix notes that BTC holders "can short a BTC Coin-M contract while keeping their spot BTC." A short inverse position offsets the coin's price move in coin terms. It also suits traders who want futures PnL to accumulate in BTC rather than in stablecoins. The trade-off is that sizing and PnL are less intuitive, and a long position adds collateral-price exposure on top of the trade.

USDT-M or USDC-M: does the stablecoin matter?

The mechanics are the same; the difference is which stablecoin you post and receive. Practical points:

  • Pair choice: USDC-M books list far fewer contracts than USDT-M on BloFin, Bitunix, Bitbase and MEXC.
  • Contract specs differ: leverage caps, fees and funding are set per contract. On MEXC on November 10, BTC_USDT showed a 500x cap and BTC_USDC a 200x cap; check the specification before trading.
  • Which stablecoin you hold: if your balance is already USDC, a USDC-M contract avoids a conversion step.
  • Funding prints separately: do not add a USDT-M funding rate to a USDC-M or COIN-M one as if they were the same market. See funding rate and live funding rates.

Exchange-specific walkthroughs: BloFin COIN-M vs USDT-M, Bitunix COIN-M perpetual futures, Bitunix USDC-M futures and USDT-M or COIN-M on BYDFi. To compare venues side by side, see BloFin vs Bitunix vs Bitbase and /compare. Promo terms stay on the BloFin, Bitunix and Bitbase promo pages, not in this article.

Questions

What does USDT-M mean in crypto futures?
USDT-M means USDT-margined. You post USDT as margin, and profit, loss, fees and funding are settled in USDT. These contracts are linear, so PnL is roughly position size in coins times the price change.
What is the difference between USDT-M and COIN-M?
USDT-M contracts use USDT as margin and pay PnL in USDT. COIN-M contracts use the coin, such as BTC, as margin and pay PnL in that coin, so the dollar value of your collateral rises and falls with the price.
Is USDT-M or COIN-M better for beginners?
USDT-M is usually easier for beginners. Margin and PnL stay in one stablecoin, dollar risk on a stop is easy to calculate, and exchanges list many more USDT-M contracts. COIN-M is more useful for hedging coins you already hold.
Does Bitbase offer COIN-M futures?
Bitbase's public contract list on November 10, 2026 showed only stablecoin-margined perpetuals: 512 tradable USDT-M contracts and 6 USDC-M contracts. No coin-margined contracts appeared in the list.
Why can a COIN-M long lose faster in dollar terms?
On a COIN-M long, a price drop creates a loss on the position and also lowers the dollar value of the coin you posted as margin. A USDT-M long only has the position loss, because its margin is a stablecoin.

Educational only. Not financial advice. Contract lists and specifications change; check each exchange's live futures page before trading.

Sources

Not financial or legal advice. Read our methodology and disclaimer.

Partner exchanges