BloFin Auto Breakeven: how the BE price includes fees and funding, and where to set activation
Key takeaway
BloFin's Auto Breakeven moves your stop loss to the breakeven price automatically once a target you set is hit, and the breakeven price it uses already includes opening fees, closing fees and funding. It lives inside the TP/SL tools on the futures page.

Here is how it actually works, where to find it, and the three edge cases that catch people.
What problem it solves
The manual version of this is familiar: you get a good entry, price runs, you mean to drag the stop to entry, you forget, and the trade round-trips into a loss. Or you add to the position, your average entry changes, and the stop you set earlier is now in the wrong place. Or you move the stop exactly to entry and still lose a little because fees and funding were never part of your math. Auto Breakeven automates all three of those.
What "breakeven price" means here
BloFin defines the BE price as the price at which the position's total PnL equals zero after closing fees are deducted. The system folds in opening and closing fees and funding fees, and shows the BE price in real time. So for a long, the BE price sits slightly above your entry. For a short, it sits slightly below. The help FAQ gives a worked example: a 0.1 BTC long opened at 60,000 USDT that has accumulated 5 USDT in fees has a BE price of roughly 60,053 USDT. The position has to get back to that level, not to 60,000, to truly break even.
It also recalculates on its own. Add to the position, reduce it, or let the funding rate change, and the BE price updates without you touching anything.
How to switch it on
- Open a position on the futures trading page.
- Scroll to the Positions panel at the bottom and click Auto Breakeven (the FAQ also describes reaching it from the TP/SL panel's Auto Breakeven tab).
- In the dialog, set the Activation Price. The window shows Last Price, Avg. Price, Mark Price and Est. Liq. Price for reference, and you can enter the activation either as a price or as a percentage. When the last price reaches your activation level, the breakeven mechanism arms and a close order is set at the calculated breakeven price.
- Review the Breakeven Trigger Rules section (Breakeven Price, Breakeven Close Order, Close Amount) and click Confirm. You can come back and edit it later.
After that, two things can happen. If the market keeps going your way, the BE line just sits there untriggered and you keep the upside, optionally with a separate take profit. If the market reverses back to the BE price, the system closes the position, aiming to break even.
Using it alongside take profit
They run independently. The FAQ example: activation at +5 percent, take profit at +20 percent. Auto Breakeven arms at +5 percent. If price keeps climbing to +20 percent, the take profit fires. If it turns around after +5 percent and comes back to the BE price, the breakeven close fires instead.
The three edge cases
- It closes with a market order. In thin or fast markets the fill can land away from the BE price, so you can still take a small loss. BloFin is explicit that this does not guarantee zero loss.
- The BE price on screen is an estimate. The value calculated at the moment of triggering is the one that applies.
- Liquidation cancels it. If the position gets liquidated first, the Auto Breakeven strategy is cancelled automatically.
Where to set the activation
This is the real skill. Put the activation too close to current price or to the BE price and normal noise will arm it and then tag it, closing a trade that was fine. On a volatile pair like $SOL.USDT or $DOGE.USDT, an activation that would be reasonable on $BTC.USDT can be far too tight. Look at the recent swing size and give it room. If you only want to protect part of a position, use the regular TP/SL feature instead, because Auto Breakeven applies to the whole position.
Common questions
Is it normal that it has not triggered? Yes. Either price has not reached your activation yet, or it activated and price simply has not come back to the BE price.
Do I need to reset it after adding size? No. The BE price and position size update automatically.
Which contracts support it? All futures contracts, so it works the same on $ETH.USDT as on smaller pairs.
Auto Breakeven is a seatbelt, not a strategy. It removes one repetitive manual job and one common math mistake, but your entry, your size and your stop distance still decide the outcome.
FAQ
Why is my BE price above my entry on a long?
Because it includes opening and closing fees and any funding paid, so price must move past entry to cover those costs.
Do I need to reset Auto Breakeven after adding to a position?
No. BloFin recalculates the BE price and the position size automatically.
Can Auto Breakeven and take profit run together?
Yes. They work independently and each triggers when its own price is reached.
Does Auto Breakeven guarantee no loss?
No. It closes at market, so fills can deviate from the BE price, and liquidation cancels the strategy.
Stale snapshot - not current
BloFin markets snapshot
Observed Nov 16, 2026, 6:25 AM ET: BloFin reported 528 listed perpetual futures (412 crypto, 110 stocks, 5 commodities and 1 index). BTC/USDT was 64,644.8 USDT (-1.13% in 24h) and ETH/USDT 1,809.4 USDT (-1.26%). The largest estimated turnover in the returned USDT tickers was BTC/USDT at approximately 249.6M USDT.
Stale snapshot · BloFin public API · perpetual / USDT · source 2026-11-16 11:25 UTC · retrieved 2026-11-16 11:25 UTC
- Listed perpetuals
- 528
- BTC/USDT
- 64,644.8 USDT
- ETH/USDT
- 1,809.4 USDT
- Approx. USDT perps 24h turnover
- 530.9M USDT
412 crypto · 110 stocks · 5 commodities · 1 index
-1.13% 24h · 249.6M USDT vol · funding +0.0021% / 8h
-1.26% 24h · 40.3M USDT vol · funding -0.0018% / 8h
Summed across 504 USDT-margined perps
Updated · Data: BloFin
Top USDT perps by 24h volume
| # | Perp | Last | 24h | 24h volume |
|---|---|---|---|---|
| 1 | BTC/USDT | 64,644.8 | -1.13% | 249.6M USDT |
| 2 | ZEC/USDT | 897.06 | -2.27% | 64.2M USDT |
| 3 | ETH/USDT | 1,809.4 | -1.26% | 40.3M USDT |
| 4 | XRP/USDT | 0.9563 | -0.77% | 22.8M USDT |
| 5 | SOL/USDT | 71.53 | -1.11% | 15.1M USDT |
Updated · Data: BloFin
Funding-rate extremes
Highest
| Perp | Rate | Every |
|---|---|---|
| EVAA | +0.1031% | 4h |
| NVDAStock | +0.0428% | 8h |
| SNDKStock | +0.0163% | 8h |
Lowest
| Perp | Rate | Every |
|---|---|---|
| TRX | -0.0423% | 8h |
| INJ | -0.0114% | 8h |
| 1000BONK | -0.0110% | 4h |
Rate per funding interval: positive means longs pay shorts, negative means shorts pay longs. Only USDT perps with at least 1.0M USDT of 24h volume are ranked.
Updated · Data: BloFin
Observation time is not an exchange timestamp. Snapshots older than 10 minutes are labeled stale, and data over 12 hours old is withheld. Turnover is approximate: base volume times last price, not reported quote turnover. USDT is not a converted USD value. Not financial advice. All BloFin market data →